PCI CM 117 Flexible adhesive, for laying ceramic tiles, slabs and natural stone, White, 25 kg bag
PCI CM 117 Flexible adhesive
Thin-bed mortar for laying ceramic tiles and slabs
Product features
- For indoor and outdoor use
- Easy processing
- Also on heated screeds
- For fully vitrified tiles
- Long open time
Fields of application
- For laying:
- Ceramic tiles and slabs made from non-vitrified and vitrified material
- Fully vitrified tiles in indoor applications
- Construction boards and installation boards
- Thin-bed and medium-bed procedures.
- For indoor and outdoor use.
- For residential and commercial applications on:
- Heated screeds, dry screeds and calcium sulphate screeds (anhydrite and anhydrite flowable screeds)
- Mastic asphalt screeds (indoors)
- Plaster substrates
- Concrete and lightweight concrete (minimum age: six months)
- Plasterboard and fiberboard
- For repair and leveling work at irregularities of up to about 10 mm prior to tile laying.
- Tested as a component of bonded waterproofing systems with PCI CL 51 and PCI Seccoral 1K.
Application
Mix PCI CM 117 with clean, clear water and stir until the mixture is completely free from lumps. Leave the mortar to mature for about 3 minutes and then stir again. If necessary, carefully add small quantities of water to set the mixture to the required consistency. For thin-bed laying, proceed in accordance with the generally recognized rules of technology.
Take the open time into account (skin formation). Select the appropriate notched trowel for the size of the tiles. Fresh adhesive residue on the edges of tiles must be removed using a sponge. When the material has hardened, it can only be removed by mechanical means. Natural stones must not be installed using blobs of mortar. Material which has already started to harden must not be stirred up again after the end of the open time.
Technical Data
| GISCODE: | ZP 1 |
| GEV-Emicode: | EC 1PLUS |
| Color: | White |
| Bulk density: | Approx. 1,29 kg/dm³ |
| Mixing ratio with water for walls | Approx. 360 ml/kg or 9 l/25 kg |
| Mixing ratio with water for floors: | Approx. 420 ml/kg or 10.5 l/25 kg |
| Maturing time: | Approx. 3 minutes |
| Open time: | Approx. 30 minutes |
| Working time: | Approx. 2 hours |
| Working temperature: | + 5 °C to + 30 °C |
| Temperature resistance: | – 30 °C to + 70 °C |
| Can be grouted after: | Approx. 12 hours |
| Dry powder consumption with notch size 4 mm: | Approx. 1.8 kg/m² |
| Dry powder consumption with notch size 6 mm: | Approx. 2.5 kg/m² |
| Dry powder consumption with notch size 8 mm: | Approx. 3.2 kg/m² |
| Dry powder consumption with notch size 10 mm: | Approx. 3.6 kg/m² |
| Dry powder consumption with medium-bed notch (In accordance with DIN 18157) | Approx. 4.9 kg/m² |
| Storage: | If stored in a cool, dry place, shelf life approx. 12 months. Seal opened containers tightly and use up soon as possible. |
| Package size: | 25 kg bag |
| Disposal: | Empty packages may be recycled. Waste code number (EWC):: 17 01 01 |
Downloads
| Country of Manufacture | Germany |
|---|---|
| Item type | Tile glue |
| Manufacturer's color / variant | White |
| Coloring | White |
| Weight (kg) per pack | 25.500000 |
| Manufacturer | PCI Augsburg GmbH |
-
![PCI CM 117 Flexible adhesive, for laying ceramic tiles and slabs, grey, 25 kg bag]()
PCI CM 117 Flexible adhesive, for laying ceramic tiles and slabs, grey, 25 kg bag€24.90(€1.00 / 1 kg)
